These terms and conditions of use are applicable to the United States, Canada and Puerto Rico websites (“collectively the Web Site”) operated by VWR (the “Company”). HALO® Chromatography Columns and Consumables+. Sartorius laboratory instruments, consumables and services PerkinElmer - Innovating for a Healthier World Lab Thermometers & Temperature Measurement EquipmentĪgilent Chemistries and Supplies Portfolio Quality Products from Sheldon Manufacturing Life Science Research Solutions, Products, and Resources VWR will support you from the latest life science products to the guaranteed purity of organic building blocks. The flange is 140 mm h x 185 mm diameter.A strong, vibrant research and development group is the lifeblood of all industries. The extractor body is ~150 mm in diameter, and the overall width at the sidearm is ~ 220 mm. The extractor is 29-3/8" (74.6 cm) overall, 27-1/2'" of which is above the joint. The tube at the top of the condenser is 30 mm OD and ~ 100 mm in height and the hose barbs are ~10 mm in diameter. The condenser is 39" (99 cm) long (36-1/4" above the joint), and has an OD of 80 mm (110 mm at the hose barbs). The overall assembled height when situated in a 12 liter mantle is approximately 87-1/2" (222 cm), the height to the top of the extractor is 51" (129.5 cm) and height to the top of the flask is ~14-3/4" (37.5 cm). The 5,000 mL complete system has a shipping weight of 35 lb (16 kg) in two boxes, one 19" x 16" 13" (48 x 41 x 33 cm) for the flask and another 42" x 20" x 16" (107 x 51 x 41 cm) for the remaining components. You will need additional clearance for a heating mantle and/or stirrer. The overall assembled height of the 500 mL system is 50" (127 cm). The overall assembled height of the 1,500 mL system is 59.5" (151 cm). These jumbo systems are available with extractor capacities of 500, 1500, and 5000 mL. This will permit retention of fine material but reduce solvent holdup during the rapid draining part of the extraction cycle. We are unaware of a commercial source for paper or cellulose thimbles sized for these units we generally recommend that our customers (even if using a thimble) construct what is basically an elongated tea bag for use with this product. The glass thimbles are similar to item # CG-1372 but have an extra coarse porosity frit. Glass thimbles are NOT part of the complete unit - these are special order, non-returnable items that are built on demand. Teflon® sleeves, heating mantles, and temperature controls must be ordered separately, of course. This complete apparatus consists of a condenser, extractor, round bottom flask, adapter, Teflon® covered O-ring and clamp. The adapter between the condenser and extractor has a top outer joint and a glass flange which attaches to the extractor body with a CG-141 stainless steel clamp. These units make tasks such as fullerene soot or essential oil extraction much, much easier! This Jumbo Soxhlet extraction apparatus is equipped with a glass flange at the top of the extractor that is formed with a groove in the flat portion of the mating surface to accept a Teflon®-covered silicone o-ring, permitting grease-free assembly.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |